Signal Fire Technology Co., Ltd.  

Product Name: Fiber Cleaver-Signal Fire Fiber Cleaver Fiber Cutter S06 for AI-7C AI-8C Condition: New Certification: CE, ISO, RoHS, GS Wiring Devices: Fiber Cleaver Type: Fiber Cleaver Trademark: Signal Fire Transport Package: Carton Box Specification: CE, ROHS, SGS AND SO ON Origin: Chengdu City, Sichuan Province, China Product Description The Surface Of Blade Body Is Treated By Abrasion Material, Not Easily Scratched.Four Ultra-High Rebound Coefficient Of The Fiber Mat (International Initiative)Cleaving Type: Single Quartz FiberApplicable Coating Diameter: 0.25 Mm ~ 0.9 MmApplicable Cladding Diameter: 125umCleave Fiber Length: 9~16(0.25),Cleave Angle: 0.5°Blade Life: 16 Surface × 2000 Times / Face = 32000 Times (Each Face Directly Cleave 2000 Times,Saving The Trouble Of Adjusting Blade Height).Measurement: 56(W)×55(L)×48(H)Weight: 265gUser Guide1.Open The Rear Switch Of Cleaver, The Upper Part Of The Cleaver Will Bounce Automatically2.Push The Protruding Rear Part Of The Cleaver, So The Blade Slide To Front Side3.Put The Holder Which Has Held The Fiber To The Blade Groove4.Press And Hold The Holder, While Press The Upper Part Of Cleaver, Push The Front Half Of The Protruding Part5.Take Out The HolderNote:1.Be Sure To Put The Holder In The Groove Correctly2.While Holding The Upper Part Of The Blade For Cleaving, Pressing To Ensure A Smooth, Flat Vertical Face To Ensure Cleaver3.Within A Certain Number Of Times For The Same End Face Cleaving Blade, Please Must Timely Handover The Blade, To Ensure The Cleaving Quality